Lemon8Lifestyle community

Send To

Line

Facebook

WhatsApp

Twitter

Copy link

Get the full app experience

Discover more posts, hashtags, and features on the app.

Open Lemon8

Open Lemon8

Open Lemon8

Not now

Not now

Not now

Category
App version

Help

US
US
日本
ไทย
Indonesia
Việt Nam
Malaysia
Singapore
Australia
Canada
New Zealand
UK

Official website Privacy Policy Terms of Service Cookies Policy

What every connector on a build is called, and which end you are holding 🔌

Learn electronics for beginners: you have been plugging these in for weeks without knowing a single one of their names — male and female, the comb of pins that came loose in the bag, the row hiding under every module, the block with a screw over each hole, and the clips that are not connectors at a

0 likes

Nobody drew this. Two servos and a pen did.

A drawing machine is the first thing most beginners build that leaves an object behind. Everything before it produces a signal. A light comes on, a buzzer sounds, a number appears on a screen, a sensor decides yes or no. Cut the power and all of it disappears. This one hands you a sheet of paper wi

1 like

It looks pushed all the way in. One pin never went in.

You push a small sensor module into the breadboard, feel it seat with that satisfying click, and start wiring. Then nothing happens. Not a wrong reading, not a flicker, nothing at all. So you check the jumpers, and they are right. You check the power rails, and they are right. You reseat the module

1 like

The kit is still in the drawer. 🧰

There is a very common object in this hobby that almost nobody talks about: the electronics starter kit that somebody bought with real intention, opened once, and then put away. It arrived in a cardboard box with foam cutouts, the board and the breadboard and the little bags of components all sitti

0 likes

Every way a build gets off the breadboard, and which ones you can undo 🔩

Learn electronics for beginners: the circuit finally works on the breadboard, and then nobody tells you what happens next — the plug that pulls apart, the wire cut to your own length, the board where the joint is solder, the four holes in the corners, the two screws into the wall, and the glue that

0 likes

You poured them in mixed. It sorted every one of these.

A color sorter is the first thing most beginners build that changes something outside itself. Everything before it produces a signal. A light comes on, a buzzer sounds, a number appears on a screen, a servo swings to the angle you typed. Unplug any of those and the room goes back to how it was. Thi

0 likes

Both motors are wired the same. That's why it spins.

Your first rolling robot is two motors, two wheels and a board, and the first time you power it up it goes nowhere. It turns on the spot, spinning as if one side is fighting the other. So you do the sensible thing and check the wiring, and the wiring is fine. Red to one terminal, black to the other

1 like

A build that fails makes no sound.

Ask people why they never started electronics and most will name something practical: money, soldering, space, time. The reason underneath is usually older and harder to say out loud: what if I try it and it just does not work, in front of everyone. That one is worth taking seriously, because it is

0 likes

Every board they tell a beginner to buy, and what each one is really for 🧠

Learn electronics for beginners: six boards get recommended in the same breath, they cost between four and forty dollars, and none of the product pages tell you what actually decides between them — the shape of the board, how many pins it carries, whether it can sleep, and whether it is a microcont

0 likes

This alarm can't be reached from bed.

Every alarm you have ever owned was designed to lose. The snooze button sits under your thumb, the volume slider is right there, and the whole thing is within arm's reach of a person who is not awake enough to be making decisions. You do not decide to go back to sleep. A hand that is barely you

0 likes

One of them is from last time.

You take yesterday's project apart, you build today's on the same breadboard, and nothing happens. So you do what everyone does: you go back to the tutorial and check the wiring one connection at a time. Power to the rail. Ground to the rail. Signal to the pin the diagram says. Every wire y

0 likes

You find out in ten seconds.

The fear that stops more beginners than soldering, wiring or math is a quiet one: that the cheap electronics parts everyone recommends will arrive broken, counterfeit or subtly wrong, and that a beginner has no way of telling. It sounds reasonable. It is also the easiest fear in this hobby to answe

0 likes

Every motor, and what the movement it gives you actually looks like ⚙️

Learn electronics for beginners: the shop sells six different things that all get called "a motor", they cost between one and twenty dollars, and none of the listings tell you the only thing that decides which one you need — the shape of the movement that comes out of the shaft 👇 #piko #

0 likes

Nobody is home, and the street has no idea 🌙

Learn electronics for beginners: this is the first build whose audience is not you. A board, one light, and a schedule that never repeats — so that a house with nobody inside keeps looking lived in from the sidewalk. No sensors, no app, no wall wiring. The whole project is a question about time 👇

0 likes

You waved your hand and the number never moved 📏

Learn electronics for beginners: this is the failure where every single wire is right. The sensor is powered, the pins are in the correct holes, the readings arrive clean and steady — and they are completely useless, because the part is aimed at your ceiling. You plugged it into the breadboard the

0 likes

Every build gets taken apart, until one of them doesn't 🔌

You pull each project apart to free the parts for the next one. Then one build answers something the house actually needs, and it stays up. That night is the real beginning. #piko #arduino #electronics #beginners #diyelectronics THE MILESTONE NOBODY PUTS ON A LIST. Beginner guides cou

0 likes

Every part that tells your board it moved, and what each one can actually say 🔄

Learn electronics for beginners: a board sitting still knows nothing about the world it is bolted to, and the shop sells six parts that fix that — all cheap, all with different names, and none of the listings explain the one thing that matters, which is how much each one can actually tell you 👇 #p

0 likes

One magnet turns your bike into a speedometer

A bike speedometer is one of the best first projects in electronics because the whole thing is a magnet, a sensor and a board, and yet the result is a real instrument bolted to something you already own and use. Here is what actually happens. You zip-tie one small magnet to a spoke of the front whe

0 likes

One of them worked. Then you plugged in the second one 🔁

Learn electronics for beginners: this is the failure that shows up on the day your build gets better, not worse. One sensor answers. One screen prints. You like it enough to buy a second of the exact same part, you wire it into the same two shared wires the way every tutorial shows, and now the one

0 likes

From a blinking LED to something that decides is five builds 🤖

People picture years of study between their first light and a project that runs on its own. It is four more builds, and every one of them is the same hand movement as the first one. #piko #arduino #electronics #beginners #learnelectronics THE PART NOBODY EXPLAINS. Almost every beginne

0 likes

See more

0Following

6Followers

2Likes and saves

Piko - Learn Electronics